MEASUREMAN 1-1/2" Dial Size, Glycerin Filled Fuel Pressure Gauge
$9
MEASUREMAN 1-1/2" Dial Size, Glycerin Filled Fuel Pressure Gauge
- Make sure this fits by entering your model number.
- For meausring fuel pressure
- 1-1/2" dial size, 1/8"NPT Back
- Pressure range: 0-15psi single scale
- Stainless steel case, brass wetted parts
- Accuracy: +/-3-2-3%
This fits your .
Product Description
Measureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable cost. "Measureman" products are selected and designed by professional engineers.
MEASUREMAN 1-1/2" Dial Size, Glycerin Filled Fuel Pressure Gauge
0-15Psi, 1/8"NPT Back Mount
- This mini pressure gauge is designed for fuel in automative replacement industry, which is used for measuring the fuel pressure.
- This liquid filled gauge is not intended to be 100% full of liquid. When held vertical, the level can appear to be between 3/4 and 7/8 full.
- The gauge must be mounted with the gauge face vertical, (or as close to 90° to the ground as possible) with the vent on top. This is to prevent the gauge from leaking during venting.
- Filling : Glycerin filled, dampens the effect of vibration and pulsation; lubricates the movement and extends the life of gauge.
How to install.
- This gauge is designed for 1/8" NPT. In some cases an adapter may be necessary.
- Ensure the regulator is mounted with the gauge face vertical,at right angles to the ground, with the Vent Valve at the top.
- Apply Teflon sealing compound to insure a leak-free connection.
- Install gauge into pressure port, being careful not to over tighten.
- After installation, start engine and check all connections for leaks.
Note.
- To vent the gauge case push the black band back covering the vent valve head and gently lift it up slightly, DO NOT REMOVE THE VALVE.
- Once the valve is raised, gauge case pressure is again equalized to atmosphere, and reported pressure will be accurate. Please push the stem
- back down and replace the black retaining band immediately after equalizing pressure to reseal the gauge and help retain the valve during vehicle
Usage.
|
|
|
|
|---|---|---|
Electric Fuel Pump |
Diesel Trucks |
Carburetor |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Back Mount | Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Back Mount | Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Back Mount | Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Back Mount | Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Back Mount | Glycerin Filled Fuel Pressure Gaugeï¼1/8"NPT Lower Mount | |
| Dial size : | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" | 1-1/2" |
| Pressure range : | 0-60 psi | 0-100 psi | 0-15 psi | 0-60 psi | 0-100 psi | 0-15 psi |
| Dial plateï¼ | aluminum, with pointer stop | aluminum, with pointer stop | aluminum, black, with pointer stop | aluminum, black, with pointer stop | aluminum, black, with pointer stop | aluminum, with pointer stop |
| Case : | 304 stainless steel case and crimped ring | 304 stainless steel case and crimped ring | 304 stainless steel case and crimped ring | 304 stainless steel case and crimped ring | 304 stainless steel case and crimped ring | 304 stainless steel case and crimped ring |
| Accuracy : | +/-3-2-3% | +/-3-2-3% | +/-3-2-3% | +/-3-2-3% | +/-3-2-3% | +/-3-2-3% |
| Working temperature : | -4 to 140 deg F/-20 to 60 deg C | -4 to 140 deg F/-20 to 60 deg C | -4 to 140 deg F/-20 to 60 deg C | -4 to 140 deg F/-20 to 60 deg C | -4 to 140 deg F/-20 to 60 deg C | -4 to 140 deg F/-20 to 60 deg C |
| Ambient temperature : | 140 deg F/60 deg C maximum | 140 deg F/60 deg C maximum | 140 deg F/60 deg C maximum | 140 deg F/60 deg C maximum | 140 deg F/60 deg C maximum | 140 deg F/60 deg C maximum |